PDF資料のダウンロード
Description: |
The Extended SLED Broadband Light Source, Operating wavelength range 800-1100nm, etc. Output power≥10dBm, max power spectral density is -20 dBm/nm.. |
Applications: |
Features: |
Optical fiber sensing Optical fiber passive component spectrum testing Optical fiber grating, DWDM, filter testing Optical fiber measurement equipments 最大動作帯域幅300nm スペクトル密度が最高-20dBm/nm スペクトル密度の安定度が高い |
Selected wavelength High spectral stability 300nmBroadband light source 光ファイバセンシングシステム 光ファイバ受動デバイス性能試験 光ファイバデバイス自動化試験システム
|
Parameters |
Unit |
|
Part No. |
- |
LQ-SLED-800~1100-P-PW-SP |
Central wavelength |
nm |
800-1100 |
-3dBSpectralwidth |
nm |
300 |
Output power |
mW |
>10 |
Power spectral density |
dBm/nm |
Normally ≥-30 (max to -20) |
Ripple |
dB |
≤0.2 |
Output power short-term stability |
dB |
≤±0.02dB/15 min |
Output power long-term stability |
dB |
≤±0.04dB/8 hour |
Operating mode |
- |
CW |
Fiber pigtail |
- |
Single modehi1060 |
Output connector |
- |
FC/PC, FC/UPC or FC/APC, etc |
Operating temperature |
℃ |
0 ~ 40 |
Storage temperature |
℃ |
-20 ~ 70 |
Power supply |
- |
AC 110/220V±10%, 50Hz, 20W |
Dimensions (L×W×H) |
mm |
320×220×90 Benchtop |
Remark: Stability is tested at room temperature 25±2℃after pre-heating 30 minutes.
1. Test condition: fixed temperature, CW.
2. Test condition: temperature variation±2℃, CW.
Order Information:
LQ-SLED-800~1100-P-PW-SP
P:Package,B-Benchtop
PW: Output power inmW, example:20-20dBm/nm,30-30dBm/nm,40-40dBm/nm
SP: Feedback protection, 0-None,1-Yes